Automatic Server Restart Screen - Toshiba Magnia 550D User Manual

Table of Contents

Advertisement

Management Software

Automatic Server Restart screen

This feature is not available on a Magnia 550D.
When you click Automatic Server Restart, the following screen displays.
On this screen, you can enable or disable Automatic Server Restart to automatically
reboot the server if the server fails to respond within a specified period.
Item
Disable
Enable
Time-out
Set
CAUTION: When enabled, if the server fails to respond or if the server is kept in a
heavily loaded state for a long period, the motherboard will reset the system and
restart the server. The function may restart without saving data. When an
application is used that increases the load or that runs high priority processes or
threads, the automatic server restart may be enabled even if the server is operating
normally, and data may be lost.
When enabling the automatic server restart function, you can specify the duration of
failure to respond or heavily loaded state after which the server automatically reboots.
The minimum duration that can be specified is two minutes.
If an OS crash occurs while this parameter is set to too small a value, the system may be
rebooted before the memory dump is completely saved. To prevent this, set a
reasonably large value that allows completion of memory dump saving.
Select this radio button to disable Automatic Server Restart.
Select this radio button to enable Automatic Server Restart.
Specify the time-out period in this edit box, in minutes.
A number from 2 to 3600 can be specified.
Saves the settings.
Explanation
183
Using HarnessEye/web

Advertisement

Table of Contents
loading

Table of Contents