Toshiba Magnia 550D User Manual page 119

Server Setup Tool 119
Starting SST
Beep sound in case of disk change
Sounds an audible alert (beep) to change storage media (CD-ROM and diskette).
Start installation according to parameter settings at boot time
The next time the SST starts, installation begins automatically after a confirmation
message using the configuration information stored on the Startup Disk. If the necessary
devices have not yet been installed, their device drivers will not be installed. If this option
is not selected, the SST starts normally at the Main Menu.
Confirm partition information during installation procedure
A dialog box appears, requiring you to confirm the deletion of the existing partition. If a
disk partition already exists, a confirmation message appears, asking if you want to
delete the partition. If this option is not selected, setup deletes the partition without
prompting for confirmation.
NOTE: If you have an existing partition, it will be deleted before installation begins.
After making your entries, click Next.
Confirm Parameter Settings
After you specify setup installation options, the Confirm Parameter Settings screen
appears. This screen displays a window listing the configuration and setup parameters
you have selected.
Confirm Parameter Settings screen
Review the information displayed on the Confirm Parameter Settings screen. To change
a setting, highlight the item and click Jump. The setup wizard will return to that screen
and allow you to make changes.
When the installation settings are correct, click Execute.