Printer Control Board (Prcb) - Konica Minolta magicolor 2500W Service Manual

5. Other
5.3.10

Printer control board (PRCB)

[1]
[2]
[1]
5. Remove parameter chip (PJ24) [1] from the printer control board.
NOTE
• When the printer control board (PRCB) has been replaced, be sure to remount
parameter chip (PJ24). Remove parameter chip (PJ24) from the old printer control
board and mount it on the new printer control board.
40
(1) magicolor 2500W
1. Remove the rear cover.
See P.31
2. Remove the right cover.
See P.33
3. Disconnect all connectors from the
[1]
A00VF2C546DA
4. Remove eight screws [1] and remove
[1]
A00VF2C547DA
[1]
Field Service Ver. 1.0 Aug. 2006
printer control board [1].
the printer control board [2].
A00VF2C548DA