Table of Contents
Advertisement
Figure 35 Basic Setting > Port Setup (XGS3700 Series: Stacking mode)
The following table describes the labels in this screen.
Table 18 Basic Setting > Port Setup
LABEL
DESCRIPTION
Slot (Stacking
This field appears only in stacking mode. Click the drop-down list to choose the slot number
mode)
of the Switch in a stack.
Port
This is the port index number. In stacking mode, the first number is the slot ID and the
second is the port number. * means all ports.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Active
Select this check box to enable a port. The factory default for all ports is enabled. A port
must be enabled for data transmission to occur.
Name
Type a descriptive name that identifies this port. You can enter up to 64 alpha-numerical
characters.
Note: Due to space limitations, the port name may be truncated in some web configurator
screens.
Type
This field displays 10M /100M/1000M for a 1000Base-T connection, 1000M for a
1000Base-X connection, and 10G for a 10 Gigabit connection (available only on the Switch
that has a 10 Gigabit interface).
Chapter 6 Basic Setting
GS3700/XGS3700 Series User's Guide
71
Advertisement
Table of Contents
