Table of Contents
Advertisement
Figure 347 Management > Maintenance > Tech-Support
You may need WordPad or similar software to see the log report correctly. The table below describes
the fields in the above screen.
Table 224 Management > Maintenance > Tech-Support
LABEL
DESCRIPTION
CPU
Type a number ranging from 50 to 100 in the CPU threshold box, and type another
number ranging from 5 to 60 in the seconds box then click Apply.
For example, 80 for CPU threshold and 5 for seconds means a log will be created when
CPU utilization reaches over 80% and lasts for 5 seconds.
The log report holds 7 days of CPU log data and is stored in volatile memory (RAM). The
data is lost if the Switch is turned off or in event of power outage. After 7 days, the logs
wrap around and new ones replace the earliest ones.
The higher the CPU threshold number, the fewer logs will be created, and the less data
technical support will have to analyze and vice versa.
Mbuf
Type a number ranging from 50 to 100 in the Mbuf (Memory Buffer) threshold box. The
Mbuf log report is stored in flash (permanent) memory.
For example, Mbuf 50 means a log will be created when the Mbuf utilization is over
50%.
The higher the Mbuf threshold number, the fewer logs will be created, and the less data
technical support will have to analyze and vice versa.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
All
Click Download to see all the log report and system status. This log report is stored in
flash memory. If the All log report is too large, you can download the log reports
separately below.
Crash
Click Download to see the crash log report. The log will include information of the last
crash and is stored in flash memory.
CPU history
Click Download to see the CPU history log report. The 7-days log is stored in RAM and
you will need to save it, otherwise it will be lost in event of Switch shutdown or power
outage.
Memory Section
Click Download to see the memory section log report. This log report is stored in flash
memory.
Chapter 47 Maintenance
GS3700/XGS3700 Series User's Guide
454
Advertisement
Table of Contents
