Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 124 IP Source Guard > IPv4 Source Guard Setup > DHCP Snooping
LABEL
Database Status
Agent URL
Write delay timer
Abort timer
Agent running
Delay timer expiry
Abort timer expiry
Last succeeded time
Last failed time
Last failed reason
Total attempts
Startup failures
Successful transfers
Failed transfers
Successful reads
Failed reads
Successful writes
Chapter 25 IP Source Guard
DESCRIPTION
This section displays the current settings for the DHCP snooping database. You can
configure them in the DHCP Snooping Configure screen. See
page
273.
This field displays the location of the DHCP snooping database.
This field displays how long (in seconds) the Switch tries to complete a specific
update in the DHCP snooping database before it gives up.
This field displays how long (in seconds) the Switch waits to update the DHCP
snooping database after the current bindings change.
This section displays information about the current update and the next update of
the DHCP snooping database.
This field displays the status of the current update or access of the DHCP snooping
database.
none: The Switch is not accessing the DHCP snooping database.
read: The Switch is loading dynamic bindings from the DHCP snooping database.
write: The Switch is updating the DHCP snooping database.
This field displays how much longer (in seconds) the Switch tries to complete the
current update before it gives up. It displays Not Running if the Switch is not
updating the DHCP snooping database right now.
This field displays when (in seconds) the Switch is going to update the DHCP
snooping database again. It displays Not Running if the current bindings have not
changed since the last update.
This section displays information about the last time the Switch updated the DHCP
snooping database.
This field displays the last time the Switch updated the DHCP snooping database
successfully.
This field displays the last time the Switch updated the DHCP snooping database
unsuccessfully.
This field displays the reason the Switch updated the DHCP snooping database
unsuccessfully.
This section displays historical information about the number of times the Switch
successfully or unsuccessfully read or updated the DHCP snooping database.
This field displays the number of times the Switch has tried to access the DHCP
snooping database for any reason.
This field displays the number of times the Switch could not create or read the
DHCP snooping database when the Switch started up or a new URL is configured
for the DHCP snooping database.
This field displays the number of times the Switch read bindings from or updated
the bindings in the DHCP snooping database successfully.
This field displays the number of times the Switch was unable to read bindings
from or update the bindings in the DHCP snooping database.
This field displays the number of times the Switch read bindings from the DHCP
snooping database successfully.
This field displays the number of times the Switch was unable to read bindings
from the DHCP snooping database.
This field displays the number of times the Switch updated the bindings in the
DHCP snooping database successfully.
GS3700/XGS3700 Series User's Guide
272
Section 25.6 on
Advertisement
Table of Contents
