ZyXEL Communications xg3700 series User Manual page 449

Management > Maintenance > Firmware Upgrade (Stacking mode)
Figure 340
The top of firmware upgrade screen shows which firmware version is currently running on the
Switch. Type the path and file name of the firmware file you wish to upload to the Switch in the File
Path text box or click Browse to locate it. Firmware upgrades are only applied after a reboot. Click
Upgrade to load the new firmware. Select the Config Boot Image drop-down list box if you want
to reboot the Switch and click Apply to apply the new firmware immediately. Click Upgrade to load
the new firmware.
After the firmware upgrade process is complete, see the System Info screen to verify your current
firmware version number.
Table 223 Management > Maintenance> Firmware Upgrade
LABEL DESCRIPTION
Slot (Stacking This is the slot index number.
mode)
Name This is the name of the Switch that you're configuring.
Status (Stacking This field displays the current stacking status on the Switch.
mode)
Chapter 47 Maintenance
GS3700/XGS3700 Series User's Guide
449