Table of Contents
Advertisement
Figure 25 Basic Setting > System Info (Stacking Mode)
The following table describes the labels in these screens.
Table 10 Basic Setting > System Info (Standalone and Stacking Modes)
LABEL
DESCRIPTION
System Name
This field displays the descriptive name of the Switch for identification purposes.
Product Model
This field displays the product model of the Switch. Use this information when searching for
firmware upgrade or looking for other support information in the website.
ZyNOS F/W
This field displays the version number of the Switch 's current firmware including the date
Version
created.
Ethernet
This field refers to the Ethernet MAC (Media Access Control) address of the Switch.
Address
CPU Utilization
CPU utilization quantifies how busy the system is. Current (%) displays the current
percentage of CPU utilization.
Memory
Memory Utilization shows how much DRAM memory is available and in use. It also displays
Utilization
the current percentage of memory utilization.
Name
This field displays the name of memory pool.
Total
This field displays the total number of bytes in this memory pool.
Used
This field displays the number of bytes being used in this memory pool.
Utilization
This field displays the percentage (%) of memory being used in this memory pool.
Hardware Monitor (Standalone Mode)
Temperature
The Switch has temperature sensors that are capable of detecting and reporting if the
Unit
temperature rises above the threshold. You may choose the temperature unit (Centigrade or
Fahrenheit) in this field.
Temperature
BOARD, MAC and PHY refer to the location of the temperature sensors on the Switch
printed circuit board.
Current
This shows the current temperature at this sensor.
MAX
This field displays the maximum temperature measured at this sensor.
Chapter 6 Basic Setting
GS3700/XGS3700 Series User's Guide
58
Advertisement
Table of Contents
