ZyXEL Communications xg3700 series User Manual page 484

Table 243 Management > Diagnostic (continued)
LABEL DESCRIPTION
Pair status Ok: The physical connection between the wire-pair is okay.
Open: There is no physical connection (an open circuit detected) between the wire-pair.
Short: There is an short circuit detected between the wire-pair.
Unknown: The Switch failed to run cable diagnostics on the cable connected this port.
Unsupported: The port is a fiber port or it is not active.
Cable length This displays the total length of the Ethernet cable that is connected to the port when the
(m)
Pair status is Ok and the Switch chipset supports this feature.
This shows N/A if the Pair status is Open or Short. Check the Distance to fault.
This shows Unsupported if the Switch chipset does not support to show the cable
length.
Distance to This displays the distance between the port and the location where the cable is open or
fault (m)
shorted.
This shows N/A if the Pair status is Ok.
This shows Unsupported if the Switch chipset does not support to show the distance.
Chapter 49 Diagnostic
GS3700/XGS3700 Series User's Guide
484