Chapter 35 Link Layer Discovery Protocol (LLDP)
Figure 269 Advanced Application > LLDP > LLDP-MED Network Policy (Stacking mode)
The following table describes the labels in this screen.
Table 178 Advanced Application > LLDP > LLDP-MED Network Policy
LABEL
DESCRIPTION
Port
Enter the port number to set up the LLDP-MED network policy. For Stacking mode the
first field box is the Slot ID, the second field box is the port.
Application Type
Select the type of application used in the network policy.
•
voice
•
voice-signaling
•
guest-voice
•
guest-voice-signaling
•
softphone-voice
•
video-conferencing
•
streaming-video
•
video-signaling
Tag
Select to tag or untag in the network policy.
•
tagged
•
untagged
VLAN
Enter the VLAN ID number. It should be from 1 to 4094. For priority tagged frames, enter
"0".
DSCP
Enter the DSCP value of the network policy. The value is defined from 0 through 63 with
the 0 representing use of the default DSCP value.
Priority
Enter the priority value for the network policy.
Add
Click Add after finish entering the network policy information. A summary table will list
all the Switch you've added.
Cancel
Click Cancel to begin entering the information afresh.
Index
This field displays the of index number of the network policy. Click an index number to
edit the rule.
Port
This field displays the port number of the network policy. In stacking mode, the first
number represents the slot and the second the port number.
Application Type
This field displays the application type of the network policy.
Tag
This field displays the Tag Status of the network policy.
VLAN
This field displays the VLANID of the network policy.
Priority
This field displays the priority value of the network policy.
GS3700/XGS3700 Series User's Guide
367