Table of Contents
Advertisement
The following table describes the links in the navigation panel.
Table 5 Navigation Panel Links
LINK
DESCRIPTION
Basic Settings
System Info
This link takes you to a screen that displays general system and hardware monitoring
information.
General Setup
This link takes you to a screen where you can configure general identification information
and time settings for the Switch.
Switch Setup
This link takes you to a screen where you can set up global Switch parameters such as
VLAN type, MAC address learning, GARP and priority queues.
IP Setup
This link takes you to a screen where you can configure the IP address, subnet mask
(necessary for Switch management) and set up to 128 IP routing domains.
Port Setup
This link takes you to screens where you can configure speed, flow control and priority
settings for individual Switch ports.
PoE Setup
For PoE model(s).
This link takes you to a screen where you can set priorities, PoE power-up settings and
schedule so that the Switch is able to reserve and allocate power to certain PDs.
Interface Setup
This link takes you to a screen where you can create IPv6 interfaces on the Switch.
IPv6
This link takes you to a screen where you can enable an IPv6 interface and configure the
IPv6 settings on the Switch.
Stacking
This link takes you to a screen where you can view and configure stacking system for the
Switch.
DNS
This link takes you to a screen where you can configure DNS (domain name server) IP
addresses.
Advanced Application
VLAN
This link takes you to screens where you can configure port-based or 802.1Q VLAN
(depending on what you configured in the Switch Setup menu). You can also configure a
protocol based VLAN or a subnet based VLAN in these screens.
Static MAC
This link takes you to screens where you can configure static MAC addresses for a port.
Forwarding
These static MAC addresses do not age out.
Static Multicast
This link takes you to a screen where you can configure static multicast MAC addresses
Forwarding
for port(s). These static multicast MAC addresses do not age out.
Filtering
This link takes you to a screen to set up filtering rules.
Spanning Tree
This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to prevent
Protocol
network loops.
Bandwidth Control
This link takes you to screens where you can cap the maximum bandwidth allowed on a
port.
Broadcast Storm
This link takes you to a screen to set up broadcast filters.
Control
Mirroring
This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference.
Link Aggregation
This link takes you to screen where you can logically aggregate physical links to form one
logical, higher-bandwidth link.
Port
This link takes you to a screen where you can configure IEEE 802.1x port authentication
Authentication
as well as MAC authentication for clients communicating via the Switch.
Port Security
This link takes you to a screen where you can activate MAC address learning and set the
maximum number of MAC addresses to learn on a port.
Time Range
This link takes you to a screen where you can configure time range for time-oriented
features like Classifier.
Chapter 4 The Web Configurator
GS3700/XGS3700 Series User's Guide
40
Advertisement
Table of Contents
