Table of Contents
Advertisement
Table 5 Navigation Panel Links (continued)
LINK
DESCRIPTION
Classifier
This link takes you to screens where you can configure the Switch to group packets based
on the specified criteria.
Policy Rule
This link takes you to a screen where you can configure the Switch to perform special
treatment on the grouped packets.
Queuing Method
This link takes you to a screen where you can configure queuing with associated queue
weights for each port.
VLAN Stacking
This link takes you to screens where you can activate and configure VLAN stacking.
Multicast
This link takes you to screen where you can configure various multicast features, IGMP
snooping, MLD snooping-proxy and create multicast VLANs.
AAA
This link takes you to a screen where you can configure authentication, authorization and
accounting services via external servers. The external servers can be either RADIUS
(Remote Authentication Dial-In User Service) or TACACS+ (Terminal Access Controller
Access-Control System Plus).
IP Source Guard
This link takes you to screens where you can configure filtering of unauthorized DHCP and
ARP packets in your network.
Loop Guard
This link takes you to a screen where you can configure protection against network loops
that occur on the edge of your network.
VLAN Mapping
This link takes you to screens where you can configure VLAN mapping settings on the
Switch.
Layer 2 Protocol
This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling)
Tunneling
settings on the Switch.
sFlow
This link takes you to screens where you can configure sFlow settings on the Switch.
PPPoE
This link takes you to screens where you can configure how the Switch gives a PPPoE
termination server additional subscriber information that the server can use to identify
and authenticate a PPPoE client.
Errdisable
This link takes you to a screens where you can view errdisable status and configure
errdisable settings in CPU protection, errdisable detect, and errdisable recovery.
MAC Pinning
This link takes you to a screen where you can set specific ports to have priority over other
ports in MAC address learning.
Private VLAN
This link takes you to a screen where you can block traffic between ports in a VLAN on the
Switch.
Green Ethernet
This link takes you to a screen where you can configure the Switch to reduce port power
consumption.
LLDP
This link takes you to a screen where you can configure LLDP settings.
Anti-Arpscan
This link takes you to screens where you can enable anti-arpscan on the Switch and
ports, and view the port state. You can also create trusted hosts, view blocked hosts and
unblock them.
BPDU Guard
This link takes you to screens where you can enable BPDU guard on the Switch and ports,
and view the port state.
OAM
This link takes you to screens where you can enable Ethernet OAM on the Switch, view
the configuration of ports on which Ethernet OAM is enabled and perform remote-
loopback tests.
ZULD
This link takes you to screens where you can enable ZULD on a port and configure related
settigns.
IP Application
Static Routing
This link takes you to a screen where you can configure static routes. A static route
defines how the Switch should forward traffic by configuring the TCP/IP parameters
manually.
Policy Routing
This link takes you to screens where you can configure policy routing rules.
Chapter 4 The Web Configurator
GS3700/XGS3700 Series User's Guide
41
Advertisement
Table of Contents
