Table of Contents
Advertisement
Figure 311 IP Application > DHCP > DHCPv4 > VLAN
The following table describes the labels in this screen.
Table 209 IP Application > DHCP > DHCPv4 > VLAN
LABEL
DESCRIPTION
VID
Enter the ID number of the VLAN to which these DHCP settings apply.
DHCP Status
Select whether the Switch should function as a DHCP Server or Relay for the specified
VID. If you select Server then fields related to DHCP relay configuration are grayed out
and vice versa.
Server
Use this section if you want to configure the Switch to function as a DHCP server for this
VLAN.
Client IP Pool
Specify the first of the contiguous addresses in the IP address pool.
Starting
Address
Size of Client
Specify the size, or count of the IP address pool. The Switch can issue from 1 to 253 IP
IP Pool
addresses to DHCP clients.
IP Subnet
Enter the subnet mask for the client IP pool.
Mask
Default
Enter the IP address of the default gateway device.
Gateway
Primary/
Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP clients
Secondary
along with the IP address and the subnet mask.
DNS Server
Lease Time
Select Infinite to have the binding always valid. Select the second radio button to set up
the binding's valid days, hours and minutes.
Chapter 43 DHCP
GS3700/XGS3700 Series User's Guide
421
Advertisement
Table of Contents
