Table of Contents
Advertisement
Figure 108 Advanced Application > Broadcast Storm Control (Stacking mode)
The following table describes the labels in this screen.
Table 66 Advanced Application > Broadcast Storm Control
LABEL
DESCRIPTION
Active
Select this check box to enable traffic storm control on the Switch. Clear this check box to
disable this feature.
Slot (Stacking
This field appears only in stacking mode. Click the drop-down list to choose the slot number
mode)
of the Switch in a stack.
Port (Standalone
This field displays the port number. In stacking mode, the first box field is the slot ID and
or stacking
the second field is the port number.
mode)
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Broadcast (pkt/
Select this option and specify how many broadcast packets the port receives per second.
s)
Multicast (pkt/s)
Select this option and specify how many multicast packets the port receives per second.
DLF (pkt/s)
Select this option and specify how many destination lookup failure (DLF) packets the port
receives per second.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel
to save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Chapter 13 Broadcast Storm Control
GS3700/XGS3700 Series User's Guide
161
Advertisement
Table of Contents
