Table of Contents
Advertisement
Figure 336 IP Application > ARP Setup > ARP Learning
The following table describes the labels in this screen.
Table 220 IP Application > ARP Setup > ARP Learning
LABEL
DESCRIPTION
Slot (Stacking
This field appears only in stacking mode. Click the drop-down list to choose the slot number
mode)
of the Switch in a stack.
Port
This field displays the port number. In stacking mode, the first number represents the slot
and the second the port number.
*
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row first
to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
ARP Learning
Select the ARP learning mode the Switch uses on the port.
Mode
Select ARP-Reply to have the Switch update the ARP table only with the ARP replies to the
ARP requests sent by the Switch.
Select Gratuitous-ARP to have the Switch update its ARP table with either an ARP reply or
a gratuitous ARP request.
Select ARP-Request to have the Switch update the ARP table with both ARP replies,
gratuitous ARP requests and ARP requests.
Apply
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel
Click Cancel to begin configuring this screen afresh.
Chapter 46 ARP Setup
GS3700/XGS3700 Series User's Guide
444
Advertisement
Table of Contents
