Table of Contents
Advertisement
Figure 200 Advanced Application > IP Source Guard > IPv6 Static Binding Setup (Standalone
mode)
The following table describes the labels in this screen.
Table 136 Advanced Application > IP Source Guard > IPv6 Static Binding Setup (Standalone mode)
LABEL
DESCRIPTION
IPv6 Static
Binding
Source Address
Enter the IPv6 address or IPv6 prefix and prefix length in the binding.
MAC Address
Enter the source MAC address in the binding. If this binding doesn't check this field, select
Any.
Note: You cannot choose Any for all three of MAC Address, VLAN and Port. You must fill
VLAN
Enter the source VLAN ID in the binding. If this binding doesn't check this field, select
Any.
Port
Specify the port(s) in the binding. If this binding has one port, select the first radio button
and enter the port number in the field to the right. If this binding applies to all ports,
select Any.
Add
Click this to create the specified static binding or to update an existing one.
Cancel
Click this to reset the values above based or if not applicable, to clear the fields above.
Clear
Click this to clear the fields above.
Index
This field displays a sequential number for each binding.
Source Address
This field displays the IPv6 address or IPv6 prefix and prefix length in the binding.
MAC Address
This field displays the source MAC address in the binding. If the entry is blank, this field
will not be checked in the binding.
VLAN
This field displays the source VLAN ID in the binding. If the entry is blank, this field will
not be checked in the binding.
Port
This field displays the port number in the binding. If this field is blank, the binding applies
to all ports.
Delete
Select an entry checkbox and click Delete to remove the specified entry.
Cancel
Click this to clear the Delete check boxes above.
Chapter 25 IP Source Guard
in at least one.
GS3700/XGS3700 Series User's Guide
289
Advertisement
Table of Contents
