Troubleshooting Method; Lcd Status Message List - Oki OKIFAX 5950 Series Maintenance Manual

4.3

Troubleshooting Method

When a problem occurs, go through the troubleshooting according to the following procedure.
Problem occurs
Problem displayed by
the LCD message

4.3.1 LCD Status Message List

The listing of the statuses and problems displayed in the form of messages on the LCD is
provided in Table 4-1.
C l a s s i f i c a t i o n
J a m e r r o r ( f e e d i n g )
*1
J a m e r r o r ( e j e c t i o n )
P a p e r s i z e e r r o r
Tray paper out
*2
*1: Indicates the same message on the display, when 1st or 2nd cassette becomes jam error
(feeding).
*2: However, if 1st cassette has recording paper, LCD indicates the standby mode on the
display and alarm message does not indicate.
OF5750/5950 Series January 2001
Troubleshooting
according to the LCD
Status Message List
(see 4.3.1)
LCD Status Message
N o t i f i e s o f o c c u r r e n c e
o f j a m w h i l e t h e p a p e r i s
being fed from Second
Paper Feeder.
12:00 XXX
PAPER MISS FEED
MEMORY FREE 100%
N o t i f i e s o f o c c u r r e n c e
o f j a m w h i l e t h e p a p e r i s
being ejected from the
12:00 XXX
Second Paper Feeder.
PAPER JAM
MEMORY FREE 100%
N o t i f i e s o f i n c o r r e c t s i z e
p a p e r f e e d i n g f r o m S e c -
ond Paper Feeder.
12:00 XXX
PAPER SIZE ERROR
MEMORY FREE 100%
N o t i f i e s o f n o p a p e r s t a t e
when both cassettes
(1st and 2nd) has no
12:00 XXX
r e c o r d i n g p a p e r .
NO PAPER
MEMORY FREE 100%
F - 11
Carry out detailed
troubleshooting
according to the
Troubleshooting Flow
(see 4.3.1)
D e s c r i p t i o n Recovery method
• Check the paper in the Second
Paper Feeder.
C a r r y o u t t h e r e c o v e r y p r i n t i n g b y
o p e n i n g a n d c l o s i n g t h e c o v e r , a n d
t u r n t h e e r r o r d i s p l a y o f f .
• When the problem occurs fre-
quently, go through the Trouble-
s h o o t i n g .
• Check the paper in the Second
Paper Feeder. Carry out the re-
c o v e r y p r i n t i n g b y o p e n i n g a n d c l o s -
ing the cover, and turn the error
d i s p l a y o f f .
• Check the paper in the Second
Paper Feeder.
Also check to see if there was a
f e e d i n g o f m u l t i p l e s h e e t s .
C a r r y o u t t h e r e c o v e r y p r i n t i n g b y
o p e n i n g a n d c l o s i n g t h e c o v e r , a n d
t u r n t h e e r r o r d i s p l a y o f f .
• Load the paper in Second Paper
F e e d e r .