Oki OKIFAX 5950 Series Maintenance Manual page 154

Table 2.9.2.3 Technical Functions: Setup (9/11)
No. Item
33 Toner Count Clear
34 Parallel Pick Up
35 Print Priority
36 RELAY BROADCAST
OF5750/5950 Series January 2001
Determine whether the toner counter can be cleared regardless
of the service bit setting (ON/OFF).
1) Setting values
ON (Can be cleared)/OFF (Cannot be cleared)
Display Counter display Counter clear
clear
Service bit
Various
OFF
counters
Drum
Toner
Drum total
Print
Scan
Determine whether parallel pickup is enabled.
To control a receiving fax by 2 digits (the same digits as remote
reception) from a telephone set connected parallel to the
telephone line.
1) Setting values
ON (Enabled)/OFF (Disabled)
Determine whether the memory is mainly used for printing.
This setting is required to rescue the image data that cannot be
stored in the page memory if ACC compression is carried out
during PC/LAN printing.
1) Setting values
Relationships between settings and page memory capaci-
ties are as follows:
ON (2560 KB)/OFF (1844 KB)
This setting becomes effective by restarting the equipment
(turning off the equipment at first and then turning on the
equipment) after the setting change.
Sets up whether to make relay broadcast.
1) Setting value
ON (Make relay broadcast) / OFF (Make no relay broadcast)
* Opening relay broadcast box disabled when this setting is
OFF.
* In the case of OKIFAX5750, setting is skipped. (Only
OKIFAX5950 operable)
2 - 47
Specifications
Service bit
ON OFF ON
Can be
replaced by user
This function
Can be
is set to
ON:
replaced by user
OFF:
Remarks