Oki OKIFAX 5950 Series Maintenance Manual page 294

4.3.19 Scanner Motor
1. Remove the scanner latch.
2. Remove the motor cable and unscrew
two screws (1) to remove the motor
along with the bracket.
Caution: Do not remove the four
screws* securing the motor.
3. Remove the bracket and ground plate by
unscrewing two screws.
Remove the Idle gear by releasing the
E-ring.
4. Remove the damper by unscrewing two
screws.
Caution: As a maintenance part, the
damper is available separately
from the motor. Keep the
damper without throwing it
away.
Precautions for Installation
1. When installing the damper, pay atten-
tion to its orientation and screw posi-
tions.
2. When installing the bracket and ground
plate, check for their positions.
OF5750/5950 Series January 2001
Scanner latch
Two screws
Ground plate
E-ring
Idle gear
Damper
Two screws
4 - 22
Four motor screws*
Bracket
Motor
Two screws 1
Bracket