Oki OKIFAX 5950 Series Maintenance Manual page 150

Table 2.9.2.3 Technical Functions: Setup (5/11)
No. Item
17 DIS Bit32
18 Error Criterion
19 OFF Hook Bypass
20 NL Equalizer
21 Attenuator
OF5750/5950 Series January 2001
Determine whether the thirty-second bit (expansion bit) and the
succeeding bit 32 of DIS is to be sent out.
1) Setting values
ON (Transmits a bit 32)/OFF (Not transmit)
* When OFF is selected, machines of other companies
cannot receive documents in the EX.FINE, SEP/SUB mode
or JBIG.
Set an image error criterion (RTN sending standard).
Sets the threshould value whether to transmit RTN or MCF
signa when the error occurs in received data.
1) Setting values
00-99 (%) selectable in (1% steps)
* Enter a value with ten-keys.
Determine whether on-hook is regarded as off-hook.
Switches the function of maintaining communication without
hooking up the telephone set in normal testing etc.
1) Setting values
ON (bypassed)/OFF (Not bypassed)
Set up the reception amplitude equalizer.
1) Setting values
Select one of the following values according to the line
length:
0 dB/4 dB/8 dB/12 dB selectable
Set the FX signal attenuator (level).
Since the maximum send signal power level (dB) of the fax is at
0dB, you can select 0dB to -15dB in one dB steps for the send
signal power level.
1) Setting values
0-15 dB (in 1 dB steps) except FRE
In case Country Code is changed in FRE:
Forcibly, set to 7dB when the attenuator setting values are
set between 0dB to 6dB.
* Enter a value with ten-keys.
Note: The send signal power level should meet your country's
regurations. Some countries may specify the power level
at a relephone exchange. In that case, you should
substract the specified level from the line cable attenua-
tion to determin the send level of your fax.
2 - 43
Specifications