Oki OKIFAX 5950 Series Maintenance Manual page 318

6.5.1 Self Diagnosis Report
Purpose: To check ROMs, RAMs and Printing function
Method: The report will be manually printed out for maintenance purpose.
6.5.2 Difference from FX-056/176
(*1 to *3 coincide with the notes on the example of the report image.)
*1 Option memory is 2MB/4MB/8MB.
*2 Describe the type (TYPE1 or TYPE2) of NIC card.
*3 Describe only when G3 option is installed.
If the cause of error (NG) is nn=01 to 03 (error information at POWER ON), description of
detailed information of option board is disabled.
G3 OPTION BOARD NG nn
nn=01 Waiting for PC loading
At power ON, BOOT2 signal from the Host read that PC is in loading mode.
nn=02 Abnormal Board
At power ON, PROGRAM HASH of ISDN board was NG.
nn=03 Abnormal Board
After 10 sec from power ON, initial sequence failed to be executed between the boards.
(Status window failed to show normal value.)
*4 Describe the TONER/ID lockout identification information 4 digits (0 or 1).
* When LM (firmware) version unmatched error with MCNT and G3/G4 option board occurs
at the time G3 or G4 option board is installed, the board details information is described
on the self diagnosis report.
OF5750/5950 Series January 2001 6 - 12