Oki OKIFAX 5950 Series Maintenance Manual page 21

No. Item
5 Automatic document feeder
(ADF) capacity
6 Document skew
7 Document jam detection
8 Document jam removal
9 Document stacking
10 Recording paper.
OF5750/5950 Series January 2001
Specifications
Max. 50 documents: 20 lb/75gm NA Letter or A4 size
paper
Max. 30 documents: 16 to 28/60 lb to 105gm NA Letter
or A4 size paper
Document shall be placed facedown on ADF stacker.
Max. 1.0 mm skew over any advance of 100 mm.
The occurrence of skew exceeding 1 mm per 100 mm
shall be 0.5% or less.
1) Transmission will stop and a line disconection will
occur when the end of the document is detected
within 380 mm after scanning begins.(except if
unlimited: Technical Setup No.10)
2) A jam will also be declared if the document does not
reach the scanning position within about 5 seconds
after the start of a document feed.
Note: When a jam is detected during message
transmission, the machine will stop, but its
receiving capability will remain valid.
Manual release
Documents up to 297 mm in length, which meet the
basic weight and thickness specification, will exit on the
stacker, and documents of Letter or A4-size will stack
in sequence.
The first sheet will be fed first in the feeder and will exit
on the stacker with printing side down.
For the first or second recording paper cassette:
1) Type: Plain paper (Bond paper: Xerox 4200 type or
equivalent)
2) Size: ISO A4: 210 mm x 297 mm
NA Letter: 215.9 mm x 279.4 mm/8.5 inch x 11 inch
NA Legal 14: 215.9 mm x 355.6 mm/8.5 inch x 14 inch
NA Legal 13: 215.9 mm x 330.2 mm/8.5 inch x 13 inch
3) Weight: 16 lbs to 24 lb/60 to 105gm base weight
Base weight is defind as the weight of 500 sheets of
431.8 mm (17 inch) by 558.8 mm (22 inch) or 1
sheet of size 1000mm by 1000mm.
4) Thickness: 0.08 mm to 0.13 mm
5) Condition: New paper
For the manual paper feeder:
1) Type: Plain paper, colored paper, printed paper,
envilope
2) Size: LA Letter/A4/NA Legal/Exective/A5/A6/etc.
3) Weight, thickness and condition: Same as above
Note: One single sheet should be loaded on the
manual paper feeder for one occation.
For best results use Oki Data recommended papers
1) Xerox 4200 (20-lb/75gm base weight paper)
1 - 12