Oki OKIFAX 5950 Series Maintenance Manual page 197

No. Item
21 Closed Network
22 Toner Save
23 Sender ID
24 1'st Paper Size
25 2'nd Paper Size
OF5750/5950 Series January 2001
Table 2.9.5.3 Machine Settings (4/6)
Set up closed network.
The TSI/CSI of the remote machine is compared with the low-
order 4 digits of the speed dial of the local machine. If they
match, closed network is performed. If they do not match,
closed network is not performed.
1) Setting values
OFF: Closed network is not performed.
TX/RX: Closed network is performed for both transmission
and reception.
RX: Closed network is performed only for reception.
Determine whether toner saving is to be performed during fax
printing.
When a LAN/PC printer is used, this setting is ignored and the
command from the host is executed.
1) Setting values
ON (Toner saving performed)/OFF (Toner saving is not
performed)
Determine whether the sender ID is to be added to the sending
data. A maximum of 32 characters are added to only outside
the document.
1) Setting values
ON (Added)/OFF (Not added)
Set the size of recording paper in the first cassette.
As the recording paper size is not detected automatically, the
operator must set it.
1) Setting values
A4/LETTER/LEGAL 13/LEGAL 14/EXEC./JIS-B5/A5/A6
* The setting data must be transferred to the G4 board.
Set the size of recording paper in the second tray.
1) Setting values
A4/LETTER/LEGAL 13/LEGAL 14/EXEC./JIS-B5/A5
* The setting data must be transferred to the G4 board.
2 - 90
Specifications