Oki OKIFAX 5950 Series Maintenance Manual page 148

Table 2.9.2.3 Technical Functions: Setup (3/11)
No. Item
07 Real Time Dial
08 TEL/FAX Switch
09 MDY/DMY
10 Long Doc. Scan
11 Tone For Echo
OF5750/5950 Series January 2001
Determine whether real-time dialing is enabled.
If it is enabled, determine when it will be enabled.
1) Setting values
OFF/TYPE1 (External telephone is off-hooked)/TYPE2
OFF: Real-time dialing is disabled (accumulated dialing
only)
TYPE1: Enabled when the external telephone is off-hooked.
TYPE2: Enabled when the external telephone is off-hooked
or the HOOK key is pressed.
Determine whether the TEL/FAX mode can be selected in the
AUTO ANSWER mode.
1) Setting values
ON (Selective)/OFF (Not selective)
* When OFF is selected in the TEL/FAX mode, the FAX
mode will be selected automatically.
Select a date display mode for LCD display and report printing.
1) Setting value
MDY (Month/Day/Year)/DMY (Day/Month/Year)
Determine whether long documents (380 mm or longer) are to
be scanned during transmission or copying.
1) Setting values
ON (1500 mm or 60 minutes)/OFF (380 mm or 60 minutes)
* 60 minutes = Transmission time
Determine whether an echo suppressor protection tone is to be
added.
This setting is required when the line condition is poor (over-
seas communication, etc.).
1) Setting value
ON (Added)/OFF (Not added)
* During speed dial transmission, this setting is ignored
because communication parameters are referenced.
* This setting affects the following settings:
Echo Protection
Ignore 1st DIS
CED-DIS Timer
Tone For Echo
2 - 41
Specifications
OFF ON
OFF ON
75ms 1.5sec
OFF ON