Oki OKIFAX 5950 Series Maintenance Manual page 191

↑ ↓
Key Key
M A C H I N E S E T T I N G S
2 9 I S D N D I A L M O D E
3 0 > S P E E C H R E C E I V E
3 1 O P T I O N L I N E T Y P E
↓
↑ Key
Key
M A C H I N E S E T T I N G S
2 9 I S D N D I A L M O D E
3 0 S P E E C H R E C E I V E
3 1 > O P T I O N L I N E T Y P E
Some options of the MACHINE SETTINGS menu cannot be selected depending on the destination of delivery,
machine specs, and machine settings. However, numbers related to speed access are fixed.
If there are unselective options, these numbers become discontinuous.
*1: This mode cannot be selected when ISDN/LAN board is installed or ODA version.
*2: This mode can be made only when 2nd tray is mounted.
*3: This mode cannot be made when Default type is set to 1 and Country code is set to USA.
*4: This mode can be made only when ISDN option board is installed. "FUNC.NOT AVAIL" is indicated during 3
seconds by pressing ENTER/→key in the case of MUPIS I/F error.
*5: Selection disabled if LAN board is installed.
*6: Transition enabled only when G3 option is present.
"FUNC. NOT AVAIL." is indicated during 3 seconds by pressing ENTER/→ key in case of MUPIS I/F error.
*7: Printing disabled when AUTO ANSWER MODE = MEM. will be handled as memory reception.
*8: Transition enabled only when 8MB option memory is installed.
*9: If 600 dpi reception picture is present in the picture memory, "ILLEGAL OPERATION" will appear for 3
seconds.
*10: OKIFAX5750 will be skipped and cannot be set.
OF5750/5950 Series January 2001
*4)
→
ENTER/ Key
3 0 S P E E C H R E C E I V E
> O F F
O N
ENTER Key
*6)
→
ENTER/ Key
3 1 O P T I O N L I N E T Y P E
> T X
R X
A L L
ENTER Key
2 - 84
"30"
OFF
ON
"31"
TX
RX
ALL