4.3.26
Back-up Roller, Transfer Roller
1. After removing the Lower Base, remove
the spring.
2. Lift the left side of the Back-up Roller
and pull it out leftwards.
Caution:
- Do not lose the ground washer.
- Do not bend the ground plate.
- Do not damage the backup roller.
3. Release the gear by unlocking the latch
on the Lower Base.
4. Lift the right side of the Transfer Roller
and shift rightwards, then pull it out from
the Lower Base.
OF5750/5950 Series January 2001
Back-up Roller
Reset lever (L and R)
Lower Base Latch
Transfer Roller
4 - 27
Upper Cover
Spring
Washer
Ground plate
Gear