Tqsb2-Pcb - Oki OKIFAX 5950 Series Maintenance Manual

3.3.2 TQSB2-PCB

(1) Remove the pulse motor (see 3.3.1).
(2) Remove the connector O from the TQSB-2PCB P.
(3) Remove the screw Q and remove the TQSB-2PCB P.
Note : Refer to Detall A in the previous page.
3.3.3 Hopping Roller Shaft Assy and One-way Clutch Gear
(1) Follow up to step (3) of 3.3.1 and remove the hopping frame assy.
(2) Remove the screw 1 and remove the earth plate 2. Remove the sensor lever 7 and
remove the ground plate 6. Remove the gear 3 and remove the metal bush 5 and
Hopping Roller shaft Assy 4.
(3) Remove the E-ring A and remove the one-way clutch gear B on the right side of the
feed roller 0.
Note : The metal bush C also comes off. Be careful not to lose it.
1
8
OF5750/5950 Series January 2001
4Hopping Roller Shaft Assy
2
6
9
F - 9
5
3
7
C
0
A
B