Oki OKIFAX 5950 Series Maintenance Manual page 27

No. Item
33 Memory capacity (Image
memory)
34 Telephone handset (option)
35 Overheat protection
36 PC interface applications (option)
37 Network print kit (option)
OF5750/5950 Series January 2001
OKIFAX 5750
OKIFAX 5950
Memory OKIFAX 5750
condition
Standard
(without option)
With
2 M-byte
option
board
4 M-byte
8 M-byte
Note1: ITU-T No.1 sample document is used to count
the number of sheets.
Note2: Memory back-up time is 72 hours (tipical and
Battery full charge condition) after the power off
condition..
General telephone function is available while the
power is on.
Note: In the fax special versions, general telephone is
available even when the power is off.
The heater of the fuser unit is controlled within the
predetermind temperature range by the thermistor. If
the temperature of the heater exceeds the range, the
LCD displays "PRINTER ALARM4".
Furethermore, the built-in thermostat in the fuser unit
prevents the heater from being overheated even in the
event of the failures in the above temperature control
circuit.
The following three modes are supported.
1) PC Printer function
2) PC Scanner function
3) PC FaxModem function
Note1: Hardware is standard and software is option for
Bi-Centro interface.
Note2: For details, see Product Spec. "MFP PC
Interface Kit".
• This function can be used for OKIFAX 5750/5950
network printer service. The OkiHSP NIC (Network
Interface Card) Ethernet Adapter used for OKIFAX
5750/5950 is originally designed for the OkiPage
printers and is intended to be forward compatible with
(future) products utilizing an OkiHSP compatible
interface.
1 - 18
Specifications
Basic model Optional memory
2.5 M-byte 2/4/8 M-byte
4.25 M-byte 2/4/8 M-byte
OKIFAX 5950
[pages]
Print Priority=OFF Print Priority=ON
200 353
360 520
520 680
840 1000
340
500
660
980