Parts Replacement; Precautions Concerning Parts Replacement - Oki OKIFAX 5950 Series Maintenance Manual

3.

PARTS REPLACEMENT

This section covers the procedures for the disassembly, reassembly and installations in the
field.
This section describes the disassembly procedures, and for reassembly procedures, basically
proceed with the disassembly procedures in the reverse order.
3.1

Precautions Concerning Parts Replacement

(1) Parts replacements must be carried out, by first turning the facsimile power switch off "O"
and removing the facsimile from the Second Paper Feeder.
(2) Do not disassemble the Second Paper Feeder if it is operating normally.
(3) Establish the extent of disassembly suitable for the purpose of the procedure, and do not
disassemble any more than necessary.
(4) Only specified service tools may be used.
(5) Disassembly must be carried out according to the prescribed procedures. Parts may be
damaged if such procedures are not followed.
(6) Small parts such as screws and collars can easily be lost, therefore these parts should be
temporarily fixed in the original location.
(7) When handling printed circuit boards, do not use any glove which may generate static
electricity.
(8) Do not place the printed circuit boards directly on the equipment or floor.
OF5750/5950 Series January 2001 F - 3