Oki OKIFAX 5950 Series Maintenance Manual page 543

(6) Remove three screws 9 which are holding the guide R (2nd) assy 0 to the bottom plate
A. Remove the screw B which is keeping the rear cover C and guide R (2nd) assy 0.
Remove the guide R (2nd) assy 0.
(7) Remove the protect (M) D, guide bracket E, planet gears F and planet gear bracket G.
(8) Remove the E-ring H which is keeping the sheet link I on the guide R (2nd) assy 0,
and pull out the hinge stand J.
(9) Remove three remaining screws K which are keeping the motor on the motor bracket L,
and remove the connector off the Stepping Motor M.
(10) Remove two screws N on the Stepping Motor M.
I
J
K
Rear Cover C
OF5750/5950 Series January 2001
O
Q
O
D
Motor Bracket L
E
B
F - 8
Detail A Guide R (2nd) Assy 0
TQSB-2PCB P H
N
G
F
9
A
Motor M