U2 Trouble Cancel; Maintenance Counter Clear; Maintenance Cycle Setting - Sharp AR-M207 Service Manual

Main Sub
code code
16 -

U2 trouble cancel

* Used to cancel the U2 trouble and execute the hard reset.
When this simulation is executed, the following execution start window is displayed. Press [OK] key or
[START] key to clear the U2 trouble.
(Execution start window)
Sim16 TROUBLE CLEAR
U2 TROUBLE CLEAR
AER YOU SURE? EXEC
20 01

Maintenance counter clear

Used to clear the maintenance counter.
Press [OK] key or A[START] key on the following window, the maintenance counter is cleared and the
machine returns to the sub code input window.
Sim20-1 COUNTER CLR
MAINTENANCE COUNTER
CLEAR
AER YOU SURE? EXEC
21 01

Maintenance cycle setting

Used to set the maintenance cycle. When this simulation is executed, the current set value is displayed.
Enter a desired code with 10-key and press [START] key. The set value is saved in the EEPROM and the
machine returns to the sub code input window.
Sim21-1 CYCLE SET.
1:MAINTE CYCLE
[
[CA] key: Exits the simulation mode.
[Interruption] key: Returns to the sub code input window.
0: 5K (5,000 sheets)
1: 7.5K (7,500 sheets)
4
2: 10K (10,000 sheets)
3: 25K (25,000 sheets)
4: 50K (50,000 sheets)
0- 5] 4
5: FREE (999,999 sheets)
(Setting range: 0 - 5, Default = 4)
AR-M207 M165 M162 SIMULATIONS 7-13
Contents Remark
Default:
4(50k)