Sharp AR-M207 Service Manual page 117

6) PC side:
Check to confirm that the tree is displayed on [Special (MCU/IMC2/
Panel/ Facsimile)] of the integrated maintenance program. If the tree
is not displayed, check that the USB is properly connected and
select [Reconnect] again in the previous procedure of (5).
7) PC side:
Double click [Special (MCU/IMC2/Panel/Facsimile)] on the main tree
items to extend the sub tree items, and select [Confirm version].
8) Check to confirm that the display below is indicated.
Version confirming is completed with the following procedures:
•In version confirming, "**.**.**" means that connection is not made with
the MCU PWB or that download is not performed. (The above figure
shows the case where the FAX PWB is not installed.)
•When download is completed, the version number is displayed such as
the MCU boot version and the MCU program version.
•The CPM and the SD-RAM size are displayed when the MCU/Panel
PWB is installed and the boot section operates normally.
AR-M207 M165 M162 FLASH ROM VERSION UP PROCEDURE 12-6