Table of Contents
Advertisement
IG. 80
After the cables have been adjusted, proceed to attach the
our
Weight Shrouds (#22)
sing eight Hex Head Cap Screws 1/4-20 X 3/4 (#114), and eight Flat
Washers 1/4 (#97).
Note: Refer to Fig. 87 on page 30 for further clarification of this
hardware assembly.
IG. 82
After the
Weight Shrouds (#22)
roceed to complete the assembly of the
#9)
and the
Rear Upright (#4)
X 4 1/4 (#104), two Flat Washers SAE 3/8" (#91) and one Nylon Insert
ock Nut 3/8-16 (#100).
23
20
128
22
to the two
Guide Rod Retainers
22
9
4
have been assembled,
Leg Extension Main Frame
using one Hex Head Cap Screw 3/8-16
22
FIG. 81
(#20).
to the
Base Frame (#2)
(#114), and eight Flat Washers 1/4 (#97).
This concludes the assembly of the AP-250S_AP-250D.
Fully Fasten: It is highly recommended that you double check
and fully fasten all hardware assemblies and inspect the cable
routing.
AP-250S_AP-250D Apollo 2-Stack Gym System
22
Next, attach the bottom of the four
using eight Hex Head Cap Screws 1/4-20 X 3/
22
2
Weight Shrouds (#22
Hide quick links:
Advertisement
Table of Contents
