TuffStuff AP-250S Owner's Manual page 12

MASKING
TAPE
133
116
IG. 36 To attach the Decal-Numbers we recommend using a piece of
masking tape as a guide to vertically align the Decal-Numbers. Attach the
Decal Weight Numbers (#116) to the Weight Plates (#133, #23, #134) in
he corresponding order. Begin with the 15 at the top, 20 next, and so on.
90
99
36
68
68
IG. 38 Locate the two Adjustable Pulley Brackets (#36)
ach two Pulleys 4 1/2 Rd. (#68) using two Hex Head Cap Screws 3/8-
6 X 1 3/4 (#110), four Flat Washers SAE 3/8" (#91), and two Nylon
nsert Jam Lock Nuts 3/8-16 (#101). Next, thread two Regular Hex
uts 1/2-13 (#99) and insert two Flat Washers SAE 1/2" (#90) over the
olts of the Adjustable Pulley Brackets
Adjustable Stoppers (#33)
#99) and insert one Flat Washer SAE 1/2" (#90) over each of the bolts,
s shown above.
11
23
116
134
90
99
36
90
99
33
(#36). Next, locate the two
and thread one Regular Hex Nut 1/2-13
24
FIG. 37 Next, attach the
Bars (#24).
90
99
36
33
A6
and at- FIG. 39 Attach the two
Top Pulley Assembly (#5)
two Nylon Insert Lock Nuts 1/2-13 (#98).
Loosely Fasten: Do not completely fasten this hardwar
assembly at this time, as it will be completely fastened later i
the assembly process.
AP-250S_AP-250D Apollo 2-Stack Gym System
24
83
24
83
83
Selector Pins w/Coil (#83)
5
36
Adjustable Pulley Brackets (#36)
using two Flat Washers SAE 1/2" (#90) an
to the Selecto
C10
to the