TuffStuff AP-250S Owner's Manual page 18

119
118
65
3
IG. 60 Attach the Abdominal Strap
/16 (#119), and one Strap Bracket #20 (#118) to the
Abdominal Cable (#38) using one Shoulder Bolt 3/8 X 3/4 (#117), and
ne Nylon Insert Lock Nut 5/16-18 (#102).
Note: Refer to Fig. A on page 27 for further clarification of this
hardware assembly.
E2
2
39
IG. 62 Continue routing the
ulley 4 1/2" Rd. (#68-Labeled E2). Next, route the cable down and
nder the Pulley 4 1/2" Rd. (#68-Labeled E3). Next, attach the end of
he Pec Dec Cable (#39) to the
ure it into place using one Socket Head Cap Screw 1/4-20 X 3/4
#143).
Note: Refer to Fig. A1 and Fig. A2 on page 28 for further
clarification of this hardware assembly. In addition, refer to the
Cable Mapping Diagram on page 28 for further detailed
illustration of the Pec Dec Cable (#39)
17
(#65), one Nylon Ball 1 3/4 X
Low Row/
26
E3
144
Pec Dec Cable (#39) up and over the
Aluminum Cam Plate (#144)
routing.
FIG. 61 Attach one end of the
num Cam Plate (#144)
Head Cap Screw 1/4-20 X 3/4 (#143). Next, route the
(#39) under the Pulley 4 1/2 Rd. (#68-Labeled E1).
Note: Refer to Fig. A1 and Fig. A2 on page 28 for furthe
clarification of this hardware assembly.
FIG. 63
bracket of the
X 1 3/4 (#110), two Flat Washers SAE 3/8" (#91), two Nylon Spacer
and se- 3/8 X 3/8 (#120), and one Nylon Insert Jam Lock Nut 3/8-16 (#101).
Note: Refer to Fig. B on page 29 for further clarification of thi
hardware assembly.
AP-250S_AP-250D Apollo 2-Stack Gym System
39
E1
144
Pec Dec Cable (#39)
and secure it onto place using one Socke
2
Locate the Tension Cable (#40)
Base Frame (#2) using one Hex Head Cap Screw 3/8-1
2
to the Alum
Pec Dec Cabl
40
and attach it to the pulle