TuffStuff AP-250S Owner's Manual page 20

IG. 68 Attach Leg Extension Seat Pad (#48)
ion Seat Frame (#12) using four Hex Head Cap Screws 3/8-16 X 1
/4 (#112), and four Flat Washers SAE 3/8" (#91).
IG. 70 Using a rubber mallet, insert one Plastic Insert Cap 1 3/4
#86) into the tube-end of the
#44). Next, attach the Bench Press Adjustable Seat Frame (#44)
he Bench Press Seat Pad (#35)
6 X 1 1/4 (#112), and two Flat Washers SAE 3/8" (#91).
19
48
12
to the Leg Exten-
86
44
35
Bench Press Adjustable Seat Frame
using two Hex Head Cap Screws 3/8-
32
FIG. 69 Next, insert one of the
the Top Adjustable Leg Holder Tube (#32)
using one Hex Head Cap Screw 3/8-16 X 1 1/2 (#111). Next, insert the
other Foam Roll 2 X 5 1/2 X 16 (#51)
(#29) and secure it into place using one Hex Head Cap Screw 3/8-16 X
1 1/2 (#111).
138
FIG. 71 Attach the assembled
Frame (#44) to the
to
AP-250S_AP-250D Apollo 2-Stack Gym System
51
29
51
Foam Rolls 2 X 5 1/2 X 16 (#51)
and secure it into plac
to the Swivel Foam Roll Tub
35
44
3
Bench Press Adjustable Sea
Front Frame (#3).
t