TuffStuff AP-250S Owner's Manual page 22

121
121
IG. 76 Insert a Rubber Grip (#121) over each one of the tube-ends
f the Low Row Bar 20" (#63), and the Lat Bar 48" (#62), as shown
bove.
Note: To facilitate the insertion of these Rubber Grips, use Win-
dex or household glass cleaner.
124
63
IG. 78 Locate the Coil Chain 3/16 X 21 (#125) and two Snap Links
#124) and attach them to the
Row/Abdominal Cable (#38), as shown above.
21
121
63
62
125
124
38
Low Row Bar 20" (#63) and to the
121
FIG. 77
using one Shoulder Bolt 3/8 X 3/4 (#117), and one Nylon Insert Loc
Nut 5/16-18 (#102). Use the supplied Hex Key 3/16" (#126) and a 1/2
combination wrench to fasten this assembly properly.
Note: Refer to Fig. A on page 26 for further clarification of thi
hardware assembly.
Connect the Lat Bar 48" (#62) to the
Link (#124). Use the
onto, when not in use.
FIG. 79
Low Leather Ankle Strap (#64) and attach it to the
Abdominal Cable (#38)
two Snap Links (#124), as shown above.
19
62
124
Next, attach one Snap Link (#124) to the
Lat Bar Holder (#19)
124
64
In replacement of the Low Row Bar 20" (#63), use th
using the Coil Chain 3/16 X 21 (#125) and th
AP-250S_AP-250D Apollo 2-Stack Gym System
Lat Cable (#37
Lat Cable (#37) using the Sna
to rest the Lat Bar 48" (#62
125
38
Leg Extension