Introduction; Specifications; Tools Requirements; Assembly - TuffStuff AP-250S Owner's Manual

A
bout the AP-250S_AP-250D
Congratulations on your new purchase of the AP-250S_AP-250D.
This gym is capable of a variety of different exercises, as well as,
mooth and user-friendly adjustment features. In addition, this gym
as been designed to meet the needs and performance
equirements for a suitable home exercise machine. We hope you
are completely satisfied with this product and wish you many years
of enjoyment.
T
uff Stuff Equipment
This Tuffstuff product has been built to precise quality standards
and has been carefully packaged to ensure that damage will not
occur during shipment.
ignature indicating final inspection has been conducted by our line
oreman, is an expression of our confidence in the completeness,
he materials, and workmanship of this product.
W
arranty
SEE A COPY OF WARRANTY ON BACK PAGE.
S
pecifications
Maximum Wt. Capacity
Total Machine Weight
Footprint (LWH)
P
rior to the Assembly of the AP-250S_AP-250D
. We advise you to consult your local Tuff Stuff retailer if you
should have a question or problem regarding the proper
assembly of this Unit.
2. Consider the complete surface area of the AP-250S_AP-250D.
Use the overhead view on the front page for designing your
layout before assembling.
been fully assembled it will be heavy and difficult to move,
therefore you should assemble the unit in the area where it is to
be used upon completion.
3. It is recommended that another person assist you with the
assembly this unit.
4. Neatly organize and identify all parts according to the Parts List
on page 31 and the Exploded View Diagram on fold-out page 32.
T
ool Requirements
1.One 9/16" combination wrench
2.One 3/4" combination wrench
3.One 7/8" combination wrench
4.One 7/16" combination wrench
5.One 1/2" combination wrench
6.One ratchet
7.One 9/16" socket
8.One 3/4" socket
9.One rubber mallet
0.One flat head steel hammer
1.External retaining-ring pliers
2.Windex or household glass cleaner
3. One can silicone spray/ teflon spray lubricant
4.Multi-purpose grease
5.Measuring tape
6.Masking tape
7.Utility knife
1
The Home Lifetime Warranty and
- 200 Lbs. Each Weight Stack
- 990 Lbs.
- See Front Cover
Once the AP-250S_AP-250D has

Introduction

A
bout the Icons
The icons displayed in this Owner's Manual are used to facilitate
the correct assembly and safe use of this Product, as-well-as to
prevent injury to yourself or anyone else.
A
ssembly Notes
1. Read and follow each step of this Assembly Instruction Manual i
sequence. Do not skip ahead, as it will result in an imprope
assembly or in having to disassemble parts later.
2. During the assembly of this unit you will be instructed to leav
some Hex Head Cap Screws loosely fastened. Naturally, the
will be fully fastened later in the assembly process. This is don
to prevent any difficulty with alignment of some parts during thi

assembly.

Note: Due to continuing product improvements, specifications and designs are subject to chang
without notice.
Even though we have prepared this manual with extreme care, neither the publisher nor the autho
can accept responsibility for any errors in, or omission from, the information given.
Note provides information necessary to properly
complete a procedure or information which wil
make the procedure easier to understand.
Caution indicates a potentially hazardous situa-
tion, which, if not avoided, may result in minor or
moderate injury. It may also be used to alert
against unsafe practices.
Loosely Fasten provides a instruction to loosely
fasten (ex: hand tighten) a hardware assembly
only. This instruction is intended for the alignment
of hardware components during the assembly
process.
Fully Fasten provides a instruction to fully fasten
(ex: completely tighten) a hardware assembly.
Hardware Measurement Diagram
AP-250S_AP-250D Apollo 2-Stack Gym System