TuffStuff AP-250S Owner's Manual page 17

IG. 56 Next, begin routing the
etween the Pulley 4 1/2 Rd. (#68–Labeled D1) and the Hex Head Cap
crew 3/8-16 X 2 (#109) as shown above.
Note: Refer to the Cable Mapping Diagram on page 27 for
further detailed illustration of the
(#38) routing
D3
38
D4
27
IG. 58 Continue to route the the
p and over the Pulley 4 1/2 Rd. (#68-Labeled D3) located on the
ulley Assembly (#5). Next, locate one of the assembled
Double Pulley Plates (#27)
le (#38) down and under the Pulley 4 1/2 Rd. (#68-Labeled D4).
Note: Refer to the Cable Mapping Diagram on page 27 for
further detailed illustration of the
(#38) routing.
AP-250S_AP-250D Apollo 2-Stack Gym System
38
D1
109
Low Row/Abdominal Cable (#38)
Low Row/Abdominal Cable
5
Low Row/Abdominal Cable (#38)
and route the Low Row/ Abdominal Ca-
Low Row/Abdominal Cable
2
FIG. 57
through the slots of the
Next, route the
1/2 Rd. (#68-Labeled D2).
Note: Refer to the Cable Mapping Diagram on page 27 fo
further detailed illustration of the
(#38)
FIG. 59
Top over the Pulley 4 1/2 Rd. (#68-Labeled D5). Next, locate the other as
Adjustable sembled
Row/Abdominal Cable (#38)
(#68-Labeled D6). Continue to route the the
ble (#38)
over the Pulley 4 1/2 Rd. (#68-Labeled D7).
Note: Refer to the Cable Mapping Diagram on page 27 fo
further detailed illustration of the
(#38)
Owner's Manual: Assembly Instructions
3
Continue to route the Low Row/Abdominal Cable (#38
Front Upright (#3)
Low Row/Abdominal Cable (#38)
routing.
38
D5
D7
D6
3
26
Route the the Low Row/Abdominal Cable (#38)
Closed-End Double Pulley Bracket (#26)
down and under the Pulley 4 1/2 Rd
through the opening of the Front Upright
routing.
38
2
D2
2
and the Base Frame (#2
under the Pulley 4
Low Row/Abdominal Cabl
5
up an
and route the Low
Low Row/Abdominal Ca
(#3), then up an
Low Row/Abdominal Cabl
16