Basic Safety Measures - Meiko EcoStar 430 F-MIKE Operating Instructions Manual

Glasswashing machine
Table of Contents

Advertisement

Operating instructions EcoStar 430 F-M
CAUTION!
CAUTION!
CAUTION!
CAUTION!
CAUTION!
Datei:1_EcoStar430F-MIKE_9702129_Betriebsanleitung_EN_2012-07.docx
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
5.2

Basic safety measures

Danger can arise from the improper use of the machine or if it is used for purposes for
which it was not intended.
Parts carrying electric current as well as moving or rotating parts can cause
Dangers to the user's life and limb and
Material damage
instructions
The machine may only be operated by adequately qualified staff who have been trained
by the operating company and who have been trained about the Hazard and Safety
Instructions.
„Qualified personnel" is defined as follows:
who are over 14 years of age
who, because of their training, experience, instruction and knowledge of the relevant
standards, regulations, accident prevention instructions and operating conditions,
have been authorised by the person responsible for the safety of the machine to car-
ry out the necessary activities, and who therefore are aware of the possible dangers
and how to avoid them,
who have been trained in first aid and in the on-site rescue arrangements,
who have read and who observe the safety instructions,
- Persons who read the operating instructions (resp. the part concerning the work to
be executed)
The machine operates with hot water. The machine operates with hot water (Tempera-
ture of wash water = 58-60 °C, by Cleaning and disinfection machine must be 74 °C). Do
not touch the wash water. Danger of scald! The washed items as well as the compo-
nents in contact with the wash water have the same temperature. Please observe ap-
propriate protective measures.
Observe all the instructions posted on the machine.
Warning !
During the operation of electrical appliances, certain parts of the appliance are under
hazardous voltages.
Before the machine's cover plates or an electrial device are opened it is imperative the
entire machine is switched off completely via the on-site power disconnection device and
that it is secured against reactivation by using appropriate measures.
Only specialist personnel may carry out repairs and rectification work on the electrical
part of the machine. Respect the safety rules.
The machine may be used again only after all cladding panels have been installed by
the user of the machine.
The machine may not be sprayed with a water hose or high-pressure cleaner.
The machine must only be operated under the supervision of instructed staff.
The water in the wash-up area is non-potable and can´t be used for food preparation!
If you are unsure about the operation of the machine, the machine must not be used.
Do not place any solvents or other easily flammable substances in the wash-up area,
as this increases explosion hazard
The appliance must not be used to transfer waste water from other sources into the
drain.
Update:
W e reserv e the right to change execution and construction!
,
9702129
9/38

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents