Basic Safety Measures - Meiko K-Tronic Operating Instructions Manual

Operating instructions dishwashing machine model K-Tronic
ATTENTION!
ATTENTION!
ATTENTION!
ATTENTIO
N!
ATTENTION!
ATTENTION!
ATTENTION!
Datei:BA-K-tronic_MIKE_9626212_EN_2005-12-01.doc
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Once the dishwashing machine has been installed, put into service and handed over to
the customer/operator, no modifications (electrical or location modifications, for example)
may be made. Modifications to the dishwashing machine, and in particular technical
modifications carried out without the manufacturer's written authorization, or any
modifications carried out by unauthorized persons, will lead to the complete loss of any
guarantee claims and will invalidate any liability for the product.
... equipment for optimising energy consumption must not be used to reduce essential
operating temperatures, as set out in DIN 10510, 10511 and 10512. If you, the client,
install equipment for optimising energy consumption, any possible reduction in the quality
of the wash and hygiene is your responsibility.
5.2

Basic safety measures

Danger can arise from the improper use of the machine or if it is used for purposes for
which it was not intended.
Parts carrying electric current as well as moving or rotating parts can cause
 Dangers to the user's life and limb and
 Material damage
The machine may only be operated by adequately qualified staff who have been trained
by the operating company and who have been trained about the Hazard and Safety
Instructions.
Qualified staff, as defined by the Operating Instructions, are persons:
 who are over 14 years of age,
 who have read and who observe the safety instructions,
 who have read and who observe the Operating Instructions (or the part applicable to
the work to be carried out).
The machine operates with hot water. Avoid all contact with the rinse water. Danger of
scalding. As a result, the dishes etc being washed are at high temperature. Take suitable
precautions.
Observe all the instructions posted on the machine.
WARNING!
When electrical equipment is in operation, it is inevitable that certain parts carry a
dangerous current.
ALL current to the whole machine MUST be switched off before the machine's cladding or
electrical equipment is opened.
PLACE THE MAIN SWITCH IN THE "OFF" POSITION and install suitable security
measures to prevent the switch from being switched on.
Work on and rectification of malfunctions on the electrical portion of the appliance must
only be carried out by specialists who have been trained and authorised by MEIKO. The
Health and Safety Regulations must be observed.
The machine may be used again only after all cladding panels have been installed by
the user of the machine.
The machine, switch cabinets and other electrical components must NOT be sprayed with
a hose or a high pressure cleaner.
W e reserv e the right to change execution and construction !
11/44
9626212