Overview of Operations
Restoring All Data in the M-5000
The data in the M-5000 is saved as a project file.
You restore data to the M-5000 by loading a project file from a USB
flash drive.
Loading a Project File from a USB Flash Drive
1.
Press the [MENU] button.
2.
On the MENU window, tap <SETUP>, then tap
<PROJECT>.
The PROJECT window appears.
ICON
3.
Move to the folder where you want to load the file.
Moves one level below the current folder.
Moves up one level.
4.
Tap <ICON> for the project file you want to load.
5.
Tap <LOAD>.
The LOAD PROJECT window appears.
60
6.
Select the section you want to load, then tap <LOAD>.
The data in the selected section is loaded.