Patchbay Window Input Tab; Patchbay Window Output Tab - Roland M-5000 Reference Manual

PATCHBAY Window INPUT Tab

In the PATCHBAY window INPUT tab, you can list the input-
connector settings for input and output devices connected to the
M-5000.
NUMBER/TYPE
Selects the device for which you want to make an
DEVICE
input connector setting.
NUMBER Input connector number
Input connector type
5 AD (analog audio input)
TYPE
5 AES (AES/EBU input)
5 MIC (TALKBACK MIC 1)
Input channel
DESTINATION
Tap and set an input channel.
48V Preamp +48 V phantom power
PAD Preamp PAD
Preamp GAIN
Make the setting using the selected knob.
GAIN
0
"Control Using Selected Knobs/Buttons" (p. 71)
Deletes the patchbay settings for all input
CLEAR
connectors.
Memo
For information on how to work with the popover for making
patchbay settings, refer to "Popover for Making Patchbay
Settings" (p. 90).

PATCHBAY Window OUTPUT Tab

In the PATCHBAY window OUTPUT tab, you can list the output-
connector settings for input and output devices connected to the
M-5000.
NUMBER/TYPE
Select the device whose output-connector settings
DEVICE
you want to check.
NUMBER Output connector number
Output connector type
5 DA (analog audio output)
TYPE
5 AES (AES/EBU output)
Output bus
SOURCE
Tap and set an output bus.
Deletes the patchbay settings for all output
CLEAR
connectors.
Memo
For information on how to work with the popover for making
patchbay settings, refer to "Popover for Making Patchbay
Settings" (p. 90).
Patchbays
89