Basic Touch Operations; Using Templates To Select A Mixer Configuration - Roland M-5000 Reference Manual

Basic Touch Operations

The following four operations are used when working with the
touch display.
Tap
Using your fingertip, you press and release an on-screen button,
area, or other item.
Double-tap
You make two taps in rapid succession.
Long tap
You touch and hold your fingertip to the touch display for a specific
interval before release.
Slide
You drag your fingertip across the touch display while pressing and
holding it against a target item.
Using Templates to Select a Mixer
Configuration
The configuration of the mixing engine in the M-5000 can be
changed as you like to suit the desired purpose. This section
describes selecting a mixer configuration from templates.
1.
Press the [MENU] button.
2.
Tap <SETUP>, then tap <MIXER CONFIGURATION>.
The MIXER CONFIGURATION window appears.
3.
Tap <TEMPLATE>.
The TEMPLATE popover appears.
4.
Tap <DEFAULT>.
Starting point templates for the mixer configurations are available.
The Default configuration has the following:
5 INPUT CHANNEL (MONO): 64
5 INPUT CHANNEL (STEREO): 4
5 MAIN: LCR
5 AUX: 24
5 MATRIX: 8
5 MONITOR 1 (STEREO)
5 TALKBACK
5 OSC 1+OSC 2
5 HEADPHONES (STEREO)
5 (The remaining audio paths: 14)
5.
Turn on the <STEREO> button for any input channel or
output bus you want to make stereo.
6.
Tap <APPLY>.
Overview of Operations
47