Prohibiting Editing For The Scene (Lock); Setting A Range To Recall; Global Scope Window - Roland M-5000 Reference Manual

Prohibiting Editing for the Scene (Lock)

Locked scenes cannot be stored, deleted or renamed.
To turn on lock for a scene, go to the SCENE window and tap
<LOCK>.

Setting a Range to Recall

You can specify a range (of channels or parameters) for recalling
scene memories.
Global Scope
Global Scope is a function for restricting channels or parameters
when performing a recall operation on all scene memories.
You make the settings for Global Scope in the GLOBAL SCOPE
window.
0"Using Global Scope" (p. 177)
Recall Filter
Recall Filter is a function for restricting channels or parameters for
recall operations on individual scenes.
You make the settings for Recall Filter in the RECALL PARAMETER
window.
0"Using Recall Filter" (p. 178)

GLOBAL SCOPE Window

In the GLOBAL SCOPE window, you set the recall range for all scene
memories.
To display the GLOBAL SCOPE window, go to the SCENE window
and tap <GLOBAL SCOPE>.
LOCK
The following four tabs are displayed.
CHANNEL
DCA/BUS
FX/GEQ/INS
OTHER
Using Global Scope
1.
On the SCENE screen, tap <GLOBAL SCOPE>.
The GLOBAL SCOPE window appears.
2.
Tap the tab where you want to set Global Scope
(<CHANNEL tab>, <DCA/BUS tab>, <FX/GEQ/INS tab>, or
<OTHER tab>).
3.
At the recall parameter list, turn off parameters you want
to exclude from scene recall.
0"Recall Parameter List" (p. 178)
Selected parameters are all excluded from scene recall.
Recall parameter list
Here you set the input-channel recall range.
Here you set the DCA GROUP/output bus/MUTE
GROUP recall range.
Here you set the FX/GEQ/INSERT recall range.
Here you set the CHANNEL LINK recall range.
Scene Memory
177