Overviewing Meters/Faders; Meter Bridge; Meter Setup Popover - Roland M-5000 Reference Manual

Overviewing Meters/Faders

Meter Bridge

On the Meter Bridge, you can overview all meters and faders for
input channels and output buses.
SETUP Tapping this displays the METER SETUP popover.
H
Exits the Meter Bridge.
Displaying the Meter Bridge
To display the Meter Bridge, go to the sidebar and tap <I>.

METER SETUP Popover

In the METER SETUP popover, you make settings for meters. These
settings are applied not only to the Meter Bridge, but also to the
HOME screen, the CH EDIT screen, and other meters.
Selects the level detection point for the input-
channel meter.
5 CH TOP
CH METER POINT
5 POST D.GAIN
5 PRE FDR
5 POST FDR
Selects the level detection point for the output-
bus meter.
5 CH TOP
BUS METER POINT
5 POST D.GAIN
5 PRE FDR
5 POST FDR
HOLD Turns peak hold on/off.
Sets the duration for which the peak hold or
"over" level indication stays lighted.
HOLD TIME
5 1-4 sec
5 CONTINUE
Sets the "over" level.
OVER LEVEL
When the "over" level is reached, the topmost
section of the meter lights up in red.
132