Formatting A Usb Flash Drive On The M-5000; Muting All Outputs; Setting The Date And Time; Factory Reset - Roland M-5000 Reference Manual

Formatting a USB Flash Drive on the
M-5000
1.
Press the [MENU] button.
2.
On the MENU window, tap <SETUP>, then tap
<PROJECT>.
The PROJECT window appears.
3.
Tap <FORMAT>.
A popup prompting you to confirm the operation is displayed.
4.
Tap <FORMAT>.
Formatting of the USB flash drive starts.

Muting All Outputs

This mutes all outputs at times such as when turning the M-5000's
power on or off.
1.
Press the [MENU] button.
2.
On the MENU window, tap <MUTE GROUP>.
The MUTE GROUP MASTER window appears.
3.
Turn on <MUTE ALL OUTPUTS>.
This mutes all outputs on the M-5000 and input/output units.

Setting the Date and Time

1.
On the HOME screen, tap <DATE & TIME AREA>.
The DATE & TIME window appears.
2.
Set the date and time, then tap <SET>.
The settings for the date and time are applied.

Factory Reset

This initializes the M-5000, returning it to its factory-default state.
NOTE
Performing initialization causes all data to be lost.
Data that is needed can be saved to a USB flash drive.
0"Backing Up All Data in the M-5000" (p. 59)
0"Restoring All Data in the M-5000" (p. 60)
1.
Go to the Display section on the top panel, and while
holding down the [MENU] button and [VIEW] button, turn
on the power to the M-5000.
2.
Tap <FACTORY INITIALIZE>.
A popup prompting you to confirm the initialization operation is
displayed.
3.
Tap <INITIALIZE>.
Initialization starts.
NOTE
Never turn off the power to the M-5000 before initialization
finishes.
The factory reset will require approximately 10 minutes.
4.
When "Factory Initialize completed." appears, tap <OK>.
5.
Turn off the power.
Overview of Operations
61