Getting Started; Checklist For Dvr Operation; Connecting The Remote Control And Dvr - Eneo DTR-6008/500CD Operating Instructions Manual

Getting started

Checklist for DVR operation

Step Action
1 Connect peripheral devices as per planned setup.
2 Specify menu language.
 Adjust date and time.
4 Set up user.
Set up network and desired notification channels
5
(optional).
6 Register peripherals with DVR.
7 Set up event types and associated responses.
8 Set up recording parameters and schedule.

Connecting the remote control and DVR

The remote control and DVR can be assigned an ID, because the ID of each DVR in the network must be
unique. The DVR will then only respond to the remote control with the matching ID.
● If the system ID in the DVR is 0, it will respond to the remote control regardless of the remote's ID.
● If the system ID in the DVR is not 0, you must set the ID of the remote control identically.
Step Action
1 Set DVR system ID.
Match remote control to system ID by
2
pressing ID button on remote control.
 Select relevant number on remote control.
16
Menu path
Setup Menu... > System > Information
Setup Menu... > System > Date/Time
Setup Menu... > System > User
Setup Menu... > Network > ...
Setup Menu... > Devices > ...
Setup Menu... > Event > ...
Setup Menu... > Record > ...
Menu path
Setup Menu... > System > Information
DTR-60XX