Software Upgrade Wizard - AudioCodes MediaPack MP-124 User Manual
Voip media gateway sip protocol
Hide thumbs
Also See for MediaPack MP-124:
- User manual (390 pages) ,
- Installation manual (58 pages) ,
- Fast track manual (44 pages)
Table of Contents
Advertisement
SIP User's Manual
3.4.2.2.1 Loading via BootP/TFTP
The procedure below describes how to load a Software Upgrade Key to the device using
AudioCodes' BootP/TFTP Server utility (for a detailed description on the BootP utility, refer
to the Product Reference Manual).
To load a Software Upgrade Key file using BootP/TFTP:
1.
Place the Software Upgrade Key file (typically, a *.txt file) in the same folder in which
the device's cmp file is located.
2.
Start the BootP/TFTP Server utility.
3.
From the Services menu, choose Clients; the 'Client Configuration' screen is
displayed.
4.
From the 'INI File' drop-down list, select the Software Upgrade Key file. Note that the
device's cmp file must be specified in the 'Boot File' field.
5.
Configure the initial BootP/TFTP parameters as required, and then click OK.
6.
Reset the device; the cmp and Software Upgrade Key files are loaded to the device.
Note:
3.4.2.3
Software Upgrade Wizard
The Software Upgrade Wizard allows you to upgrade the device's firmware (compressed
cmp file) as well as load an ini file and/or auxiliary files (typically loaded using the 'Load
Auxiliary File' page described in ''Loading Auxiliary Files'' on page 170). However, it is
mandatory when using the wizard to first load a cmp file to the device. You can then
choose to also load an ini file and/or auxiliary files, but this cannot be done without first
loading a cmp file. For the ini and each auxiliary file type, you can choose to load a new file
or not load a file but use the existing file (i.e., maintain existing configuration) running on
the device.
Warning:
Version 6.2
To load the Software Upgrade Key using BootP/TFTP, the extension name of
the key file must be *.ini.
The Software Upgrade Wizard requires the device to be reset at the end of
the process, which may disrupt traffic. To avoid this, disable all traffic on
the device before initiating the wizard, by performing a graceful lock (see
Saving and Resetting the Device).
175
3. Web-Based Management
February 2011
Advertisement
Table of Contents
Troubleshooting
