Applications Enabling; Figure 3-66: Media Security Page - AudioCodes MediaPack MP-124 User Manual

3.3.2.3.6 Configuring Media Security
The 'Media Security' page allows you to configure media security. For a detailed
description of the parameters appearing on this page, see ''Configuration Parameters
Reference'' on page 333.
To configure media security:
1. Open the 'Media Security' page (Configuration tab > VoIP menu > Media submenu >
Media Security).
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 169.
3.3.2.4

Applications Enabling

3.3.2.4.1 Enabling Applications
The 'Applications Enabling' page allows you to enable the following application:
Stand-Alone Survivability (SAS) application
Notes:
SIP User's Manual

Figure 3-66: Media Security Page

•
This page displays the application only if the device is installed with the
relevant Software Upgrade Key supporting the application (see ''Loading
Software Upgrade Key'' on page 172).
•
For enabling an application, a device reset is required.
102
MediaPack Series
Document #: LTRT-65415